Toyota Alphard 2 nd generation was produced in 2009, 2010, 2011, 2012, 2013, 2014 and 2015. During this time, the model has been restyled. The sports version of this model is also known as the Toyota Vellfire 20. In our article you will find information describing the fuses and relays of the Toyota Alphard 2 Velfire with fuse box diagrams, their locations and photo examples of performance. Select the cigarette lighter fuse.
The purpose of the fuses and relays may differ from those shown and depends on the year of manufacture and the level of electrical equipment of your car.
Contents
Passenger compartment
Left fuse box
The fuse box is located at the bottom of the instrument panel on the passenger side.
Photo
Check the purpose of the elements with your diagrams on the block cover.
Diagram
Assignment
| 1 LH ECU-IG | 10A Body ECU, power sliding door |
| 2 SEAT HTR LH | 10A Seat heater |
| 3 GAUGE NO.2 | 10A Backlight |
| 4 STP RR | 7,5A Braking light |
| 5 STP HI MT | 7,5A High mount stop lamp |
| 6 STP RL | 7,5A Braking light |
| 7 RR WIP | 15A Rear wiper |
| 8 GAUGE NO.1 | 10A Meter, front wiper deicer |
| 9 PANEL | 10A Switch lighting |
| 10 TAIL2 | 10A Taillight |
| 11 TAIL | 10A Taillight |
| 12 P/SEAT LH | 30A Passenger seat |
| 13 4WD | 7,5A 4WD system |
| 14 AC INV | 15A Accessory outlet |
| 15 DR LOCK | 30A Body ECU |
| 16 P/W FL | 20A Power window |
| 17 S/R | 20A Moon roof |
| 18 PSD LH | 30A Power sliding door |
| 19 P/W RL | 20A Power window |
| 20 PBD | 30A Power back door |
Right fuse box
At the bottom of the panel, on the driver’s side, there is another fuse box.
Photo example
Label
Diagram
Designation
| 1 FR WIP | 30A Front wiper |
| 2 SEAT HTR RH | 10A Seat heater (driver’s seat side) |
| 3 RH ECU-IG | 10A Air conditioner |
| 4 P/SEAT RL | 25A Passenger side second seat |
| 5 P/SEAT RR | 25A Driver side second seat |
| 6 ECU-IG3 | 15A Seat heater (second seat on the driver’s side) |
| 7 P/POINT | 15A Accessory socket |
| 8 CIG | 15A Accessory socket |
| 9 RAD NO.2 | 7,5A Navigation system |
| 10 ECU-ACC | 7,5A Door mirror |
| 11 IGN | 10A Ignition |
| 12 MET | 7,5A Meter |
| 13 PSB | 30A Pre-crash seat belt |
| 14 RR FOG | 7,5A Rear fog lights |
| 15 P/W FR | 20A Power window |
| 16 P/SEAT RH | 30A Driver’s seat |
| 17 AM1 | 7,5A Driving position memory |
| 18 STOP | 15A Braking light |
| 19 OBD | 7,5A Diagnosis connector |
| 20 PSD RH | 30A Power sliding door |
| 21 P/W RR | 20A Power window |
The fuse number 8 at 15A is responsible for the operation of the cigarette lighter
Some relays can be installed separately.
Engine compartment
Under the hood, there can be 2 fuse and relay boxes (left and right) and one with fuses (hybrid versions).
Fuse box A
Diagram
Allocation
| 1 ABS NO.2 | 30A VSC actuator |
| 2 DEF | 30A Rear window defogger |
| 3 EFI | 20A EFI |
| 4 CAPACITOR | 15A Hybrid system |
| 5 ECU-B | 10A Power sliding door |
| 6 DOME | 7,5A Interior light |
| 7 RAD NO.1 | 15A Navigation system |
| 8 MIR HTR | 10A Mirror heater |
| 9 SLOPE NO.2 | 30A Slope |
| 9 ABS MAIN1 | 10A Brake system |
| 10 ABS MAIN2 | 10A Brake system |
| 11 ETC-S | 10A EFI |
| 12 AM2 NO.2 | 7,5A Body ECU |
| 13 TRN HAZ | 15A Turn signal,hazard light |
| 14 IG2 | 15A Injection |
| 15 ABS MAIN3 | 15A Brake system |
| 16 FR DOOR | 30A Body ECU |
| 17 A/F | 30A EFI |
| 17 A/C W/P | 10A Air conditioner |
Scheme from the block cover with a description of the relay
Fuse box B
Diagram
Appointment
| 1 HORN | 10A Horn |
| 2 STRG LCK | 20A Steering lock |
| 3 AMP NO.2 | 30A Audio amplifier |
| 4 AMP NO.1 | 30A Audio amplifier |
| 5 ECU-B3 | 7,5A Smart ECU |
| 6 ECU-B2 | 7,5A Air conditioner |
| 7 S/HORN | 10A S/Horn |
| 8 DEICER | 20A Front wiper deicer |
| 9 FOG | 20A Front fog lights |
| 10 H-LP RH *1 | 15A Right headlamp (high beam) |
| 10H-LP RL *2 | 15A Right headlamp (low beam) |
| 11 H-LP LH *1 | 15A Left headlamp (high beam) |
| 11 H-LP LL *2 | 15A Left headlamp (low beam) |
| 12 H-LP RL *1 | 15A Right headlamp (low beam) |
| 13 H-LP LL *1 | 15A Left headlamp (low beam) |
| 13 H-LP RH *2 | 15A Right headlamp (high beam) |
| 14 H-LP HI NO.2 *1 | 20A Automatic high beam |
| 14 H-LP LH *2 | 15A Left headlamp (high beam) |
Fuse box C
Diagram
Decoding
- 7.5A EFI NO.1 – Hybrid system
- 10A OIL PMP – Hybrid System
- 10A PCU – Hybrid System
- 7.5A IGCT NO.1 – Hybrid system
- 10A INV W/P – Hybrid system
- 7.5A IGCT NO.2 – Hybrid System
- 10A BATT FAN – Hybrid System
Have something to add – write in the comments.