The 1st generation Kia Rio was produced in 2000, 2001, 2002, 2003, 2004, 2005 with gasoline engines in sedan and station wagon bodies. During this time, the model has been restyled. In this material you will find a designation of the fuses and relays of the Kia Rio 1st generation with diagrams and photographs of the boxes. Let’s highlight the fuse responsible for the cigarette lighter.
Kia Rio generation not suitable?
Located under the dashboard on the driver’s side.
Photo for example
|TURN LAMP||10A Turn signal lamp|
|METER||10A Instrument cluster, reversing lamp, warning sound|
|ILLUMI||10A Switch backlight|
|POWER SOCKET||15A Luggage compartment lamp, power socket|
|HAZARD||15A Alarm lamp|
|STOP||15A Brake light, ABS|
|TAIL (RH)||10A Side light lamp (right rear / left front), backlight|
|TAIL (LH)||10A Side light bulb (left rear / right front)|
|CIGAR||15A Cigarette lighter|
|AUDIO||10A Audio system, electric drive of a rear-view mirror|
|WIPER (FRT)||15A Screen wiper, washer (front), sunroof|
|WIPER (RR)||15A Screen wiper (rear). Washer (rear)|
|(WARMER)||15A Heated front seat|
|MIRROR DEF||10A Heated outside rearview mirror|
|START||10A Engine control unit, ECAT unit|
The fuse designated as CIGAR 15A is responsible for the cigarette lighter.
Mounted next to the fuse box on the wall. Its performance depends on the level of electrical equipment of your Kia Rio 1.
- Cooling fan relay
- Heated rear window relay
- Hazard warning light relay
- Horn relay
Located on the left side, next to the battery, under the protective cover.
|PR FOG||10A Rear fog lamps|
|F / FOG||15A Front fog lights|
|MAIN||80A rechargeable battery without recharging|
|IG1||30A Automatic connection to secondary fuses CIGAR 10A, AUDIO 10A, IG COIL 15A, TURN LAMP 10A, A / BAG 10A, WIPER (RR) 15A WIPER (FRT) 15A, RELAY 10A START 10A|
|COOLING||30A Cooling fan|
|ABS 1||30A ABS|
|COND. FAN||20A Condenser fan|
|HEAD-HI||15A High beam lamp|
|HEAD-LOW||15A Low beam lamp|
|EMS||10A Engine sensors|
|INJECT||15A Injector, oxygen sensor|
|F/PUMP||10A Fuel pump|
|ECU||10A Engine control unit, ECAT unit. the main thing|
|RELAY||10A Fan motor, power window, rear window defogger, headlight pump (for vehicles equipped with an airbag)|
|HLLD||10A Headlight range control|
|MAIN RELAY||25A Carries out automatic connection to secondary fuses EMS 10A, INJECT 15A, F / PUMP 10A, ECU 10A|
|HEAD||25A Carries out automatic connection to secondary fuses HEAD-HI 15A, HEAD-LOW 15A|
|IG2||30A Engine management|
|TOS||15A Carries out automatic connection to secondary fuses TAIL 10A, TAIL 10A|
|HORN||10A Sound signal|
|RRDEF||25A Heated rear window|
|ABS 2||30A ABS|
|P/WIN||30A Power window|
|BTN||30A Carries out automatic connection to secondary fuses ROOM 15A, STOP 15A, HAZARD 15A|
|D/LOCK||25A Central door lock|
|IG COIL||15A Ignition coil|
|ROOM||15A Interior lamp, audio system, instrument cluster, warning horn|
Separate relays can be installed outside the box: relay for additional heater, relay for heated glass, etc.
That’s all, and if you have something to add to the material, write in the comments.