Kia Bongo 3 (K-Series) – fuse and relay

Kia Bongo 3 Series has been delivered worldwide with various changes and modifications (pickup, refrigerator, van) and is also known under the names Kia K-Series or Kia Besta. During its production, this model has been restyled. In our article you will find a deesignation of fuses and relays Kia Bongo (modifications K2500, K2700, K2900, K3000) 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 years of release with box diagrams and their locations. Let’s highlight the fuse responsible for the cigarette lighter.

kia bongo 3

The design of the boxes, their arrangement and the purpose of the elements in them in your Kia Bongo may differ from the one presented and depends on the year of manufacture, the country of delivery and the level of equipment. Check the description with your diagram on the back of the protective cover.

Passenger compartment

It is located in the lower left part of the dashboard, behind the protective cover.

Photo of the unit in the cabin

Diagram

scheme - appointment

Assignment

MEMORY15A Fuse “MEMORY”
STARTER10A Starter
B/UP LAMP10A Reversing lights
ENG10 / 15A Engine management system
CLUSTER10A Instrument cluster
T / SiG10A Direction indicators
HEATER CONTROL10A Heater
MODULE10A ETACS system
FUEL HEATER15A Fuel heating
WIPER15A Windshield wiper
CIGAR LIGHTER15A Cigarette lighter
ACC10A Optional equipment
HLLD10A (Modifications) Headlight Position Correction System
DOOR LOCK20A (Modifications) Central locking
STOP LAMP10A Stop lights
HORN10A Sound signal
REAR FOG15A (Modifications) Fog lights
FOG LAMP15A (Modifications) Fog lights
HAZARD15A Alarm
KEY ILLUMI10A (Modifications) Ignition switch illumination
ILLUMI10A Lighting
TAIL LAMP10A Rear dimensions

The cigarette lighter fuse is designated CIGAR LIGHTER.

Relay

  1. size relay
  2. horn relay
  3. fog lamp relay
  4. relay – turn signal interrupter
  5. relay connector for connecting additional equipment
  6. heater fan motor relay

Box under the frame

It is also closed with a protective cover, in some models it is carried under the hood. In any case, it is next to the battery and protected by a 100A main power fuse.

underframe fuse box

Diagram

Block diagram 2

Assignment

SPARESpare
BTN130A Tailgate relay
BROWER30A Heater fan motor
COND20A A / C condenser fan motor relay
IC FAN20A Intercooler motor
RR HTD20A Heated cab rear window
IGN230A Ignition system
MAIN100A Main power fuse
IGN130A Ignition system
BTN230A Main relay
EVERYTHING10A Generator
A / CON10A Air conditioner
ECU15A Engine management system
P/W (REAR)25A Power windows for front doors
P/W (FRT)25A Power windows for rear doors
H/LP (RH)15A Right headlight
H/LP (LH)15A Left headlight
GLOW HTR60A Glow plug relay

 

Found an inaccuracy? We will be glad to receive your comments.

Comments 5

  • Where does the activator power supply come from? /2005 Bongo-3/

  • Why K2700 didn’t start and only kranking?
    What causes it and what is the solution for that?

    • Where is the car stereo fuse located?

    • Either the heater injectors aren’t heating. Solution is modify by creating a heavy duty heater plug switch… Which is pressed at least for 10 seconds while the key is switched on.
      Or tank fuel or pressure pumps got issues that may need to attend to.

      So it’s electrical and mechanical challenges

  • Cómo va instalado las correas

Leave a Reply

Your email address will not be published. Required fields are marked *