Opel Movano B presents the 3rd generation Movano. Years of manufacture 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020. Also known as Vauxhall Movano B. In this publication you can find a description of Movano B fuses and relays with box diagrams and locations. Highlight the cigarette lighter fuse.
The number of elements in the boxes and their purpose may differ from the one shown. In case of difficulty, contact your dealer.
Contents
Engine compartment
Located under the barrel. To access the box, it must be removed.
Type 1
Diagram
Appointment
F1 | – | – |
F2 | – | – |
F3 | 50 | BUS X62 |
F4 | 40 | ABS ECU |
F5 | 50 | Additional heating relay 1 |
F6 | 50 | Purpose-built body conversion, X62 BUS |
F7 | 70 | Additional heating relay 2 |
F8 | 70 | Rear lights, passenger compartment fuse-relay box, diesel heater resistance |
F9 | 70 | Passenger compartment relay and fuse box |
F10 | 50 | Motor fan relay 3, motor fan relays (rating depending on vehicle spec.) |
40 | ||
F11 | 40 | Motor fan speed Relay 1,Motor fan speed Relay 2 (rating depending on vehicle spec.) |
50 | ||
60 | ||
F12 | 40 | Starts engine |
F13 | 60 | Heating interface unit |
F14 | 60 | Heating interface unit |
F15 | 70 | Diesel glow plug relay unit |
F16 | 40 | Gearbox electro pump unit relay |
50 | Fuse box 2 | |
BUS FUSE PLATE (260BA) | ||
F1 | 5 | Lighting control relay power supply (GRUAU) Front and rear lighting |
F2 | 5 | Lighting control relay power supply (GRUAU) Individual lighting (X81) |
F3 | 50 | Relay 1155 power supply (70A + load shed accessory relay) |
F4 | 25 | Relay 1155 power supply (70A + BCM battery relay) |
F5 | 10 | Power supply for multimedia display from GRUAU kits |
F6 | 5 | Door sill electronic control unit power supply |
F7 | – | – |
F8 | – | – |
Type 2
The photo
Diagram
Designation
F1 | 7,5А Right side light |
F2 | 7,5А Left side light |
F3 | 10А Right dipped beam lights |
F4 | 10А Left dipped beam lights |
F5 | 20А Fog lamps |
F6 | 10А Left main beam light |
F7 | 10А Right main beam light |
F8 | 25А ABS power supply |
F9 | 30А Windscreen wiper |
F10 | 10А Airbag PIS (primary ignition supply) |
F11 | – |
F12 | 20А Gearbox ECU power supply (Front wheel drive) |
F13 | – |
F14 | – |
F15 | – |
F16 | 5А Gearbox PIS (primary ignition supply) |
F17 | 7,5А Passenger compartment PIS (primary ignition supply) |
F18 | 5А Injection ECU/diesel heater relay |
F19 | 10А Rear running lights PIS (primary ignition supply) |
F20 | – |
F21 | – |
F22 | 10А Air conditioning (compressor) I |
F23 | 5А Defrosting (relay control) |
Passenger compartment
Main box
The photo
On the back of the protective cover you will find the current layout
Designation of elements
Diagram
Assignment
1 | 10 | Infotainment system, seat heating, (Service relay 1. Engine running relay) |
2 | 15 | Power outlet 1 |
3 | 10 | Cigarette lighter |
4 | 10 | Power outlet 2 |
5 | 5 | Instrument panel |
6 | 30 | Central locking (UCE Habitacle (CPE, SUPCPE), BFR) |
7 | 25 | Turn signals, rear fog lights, body control module (UCE Habitacle + Batsecurite) |
8 | 5 | Diagnostic connector |
9 | – | – |
10 | 5 | ABS, Electronic Stability Program |
11 | 10 | Interior lights, brake lights |
12 | 5 | Body control module |
13 | 15 | Brake light |
14 | 5 | Body control module, power windows, air conditioning |
15 | 20 | Left heated rear window |
16 | 20 | Right heated rear window |
17 | 15 | Windscreen washer (Steering mounted controls) |
18 | 5 | Electronic immobiliser |
19 | 15 | Heated seats (BFRH2, ADPCNC, adaptation compiementaire) |
20 | – | – |
21 | 10 | Cornering lights |
22 | 10 | Infotainment system, seat heating, vehicle display screen, audio connections, alarm |
23 | five | Hands-free connection |
24 | 10 | Tachograph |
25 | – | – (diode location) |
26 | – | – (diode location) |
27 | 40 | Climate control fan |
28 | 10 | Additional adaptations (BFRH2, ACC deleste relay, easement relay 1) |
29 | 40 | Power windows, body control module |
Additional boxes
They are located on the right side (left and right hand drive) under the dashboard and are attached to the right flange of the dashboard beam.
Box 1
Appointment
- 20А – 12 V load shed current distribution power supply
- 20А – Engine running information
- 20А – Heated seat
Box 2
Designation
- 20А Sliding door
- 20А Boot lid
- 20А Bus heated seat
- 20А Bus ESP
- 40А A/C info
- 70А BCM + battery feed
- 70А + load shed accessory feed
Check out our YouTube video for more on this topic. Don’t forget to subscribe!
That’s all. If you find a mistake or have something to add – write in the comments.
What is the role of the ADP fuse, #28 on the main fuse box? It has a wire on the load side of the fuse which doesn’t appear to have any load connected to it, unless it’s ignition controlled further downstream. I am thinking of using it for some auxiliary lighting. Where does the outgoing wire go to/where does it terminate?