The 1st generation Hyundai Santa Fe is also known as the Santa Fe Classic and was produced in 2000, 2001, 2002, 2003, 2004, 2005 and 2006. During this time, the model received several minor updates. In this material you will find a designation of the 1st generation Hyundai Santa Fe fuses and relays with box diagrams, photo examples of execution and locations. Let’s highlight the fuse responsible for the cigarette lighter.
The number of elements in the boxes may differ from the one presented. Check the assignment with your diagrams on the back of the cover.
The wrong generation of Hyundai Santa Fe?
[ Description for Hyundai Santa Fe 2 ]
[ Description for Hyundai Santa Fe 3 ]
[ Description for Hyundai Santa Fe 4 ]
Passenger compartment
It is located under the dashboard on the driver’s side.
Example of a legend from the box cover
Diagram
Assignment
F1 | 20A Cigarette lighter and socket |
F2 | 10A Audio, outside mirror with electric drive |
F3 | 15A Digital clock, socket at the back |
F4 | 10A Cruise control |
F5 | 10A Headlight relay |
F6 | 20A Heated seat |
F7 | 10A Rear wiper motor control |
F8 | 10A Heated rear window, outside mirror with electric drive |
F9 | 10A Air conditioning control, sunroof control, electric chrome mirror |
F10 | Reserve |
F11 | 10A Interior lamp, door switch, door lamp, manual air conditioning, Homelink controller |
F12 | 15A Digital clock, ETACM, audio, siren |
F13 | 20A AMP Speakers |
F14 | 10A Brake light, data connector, universal test connector |
F15 | 10A Emergency lamp |
F16 | 25A Power seat, rear wiper motor control |
F17 | 20A Sunroof controller |
F18 | 30A Heater relay |
F19 | 10A Instrument cluster, pre-excitation resistor, ETACM, automatic light sensor, DRL control module, generator |
F20 | 15A SRS control module |
F21 | 10A ECM (V6 2.7 L), PCM (I4 with automatic gearbox), ECM (I4 with manual gearbox) |
F22 | 10A Instrument cluster (Airbag IND) |
F23 | 10A ABS control module, G-sensor, bleed connector, 4WD control module |
F24 | 10A Turn signal lamp |
F25 | 10A Reversing light, TCM, ETS control unit, Ignition failure sensor |
F26 | 20A Door lock / unlock relay, key lock / unlock relay |
F27 | 10A Rear and parking light (left), turn signal lamp, license plate lamp |
F28 | 10A Rear and parking light (right), fog lamp relay, lighting switch |
F29 | 15A ETS control module (V6 3.5L), safety relay |
F30 | 10A Radiator fan relay, condenser fan relay |
F31 | 20A Front wiper motor, wiper relay, washer motor |
The fuse number 1, 20A, is responsible for the cigarette lighter.
Relay
Above the fuses there are 2 relays: a relay for the electric drive glass of the lifters and a relay for the rear window defroster.
And on the back of the box, several relay elements are also attached.
Engine compartment
Located next to the battery.
Photo for example
Diagram
Designation
EVERYTHING | 140A Generator |
B+ | 50A Tail light relay, fuse 11-17, power connector |
IGN | 50A Start relay, ignition switch |
BLR | 40A Air conditioner fuse, fan relay |
Paragraph 1 | 30A ABS control unit, air outlet connector |
Paragraph 2 | 30A ABS control unit, air outlet connector |
ECU | 40A Engine control relay |
P/W | 30A Relay for electric glass lifter, fuse 26 |
RAD FAN | 40A Radiator fan relay |
C/FAN | 20A Condenser fan relay |
FRT FOG | 15A Fog lamp relay |
H/LP(LH) | 10A Left headlight, instrument cluster, DRL control unit |
H/LP(RH) | 10A Right headlight |
ECU #1 | 20A Ignition failure sensor, oxygen sensor |
ECU #2 | 20A Injector |
ECU #3 | 10A Engine management, ECM, PCM |
ECU(B+) | 15A Fuel pump relay, ECM, TCM, Alternator, PCM |
ATM | 20A Monitoring relay, 4WD control module |
HORN | 10A Horn relay |
A/C | 10A Relay for air conditioning |
ST SIG | 10А PCM, ECM |
On our YouTube channel, we also posted a video. Watch and subscribe.
If you have something to add – write in the comments.
Good Morning
asked for the location of the hyundai santa fe 2004 relay wiper
Good afternoon, I have 2005 Santa Fe 3.5
Where would I find door lock relay and or fuse
Hyundai Santa fe 2005 2.7L le he cambiado el sensor Camshaf código P0340 y aún sigue marcando defectuoso.
Al ventilador del condensador de A/C no le llega corriente positivo.